Latest News & Insights

A Cat6 vs Cat6A mistake rarely shows on day one. It shows up years later, when the network is upgraded and the cable in the walls cannot carry it. Cat6 and Cat6A both run gigabit to the desk. They differ at 10 gigabit. They also differ in how cable behaves in a bundle and how […]

Most commercial access control problems start at the quote, not at the door. Usually, the brief said “ten doors with readers”. However, nobody wrote down what each door had to do. This guide is a buyer’s checklist. In short, it covers what to specify before you sign. For the cabling the system runs on, see […]

Most problems with business security cameras are not camera problems. They are planning problems. The system records, but the footage cannot identify anyone. Or it works on day one and runs out of capacity at camera number 40. This guide covers how to plan business security cameras as one commercial CCTV system, so it still […]

Security system installation in Brisbane: what a commercial site should specify before work starts, from risk review and cabling to commissioning.

Most data cabling installation problems are not cable problems. Instead, they come from decisions made, or skipped, before the first cable goes in. A commercial data cabling installation that runs well follows six stages. Each stage has a job. If you skip one, the cost usually shows up later, after the ceiling closes and the […]

Access control is only as reliable as its cabling. See how Cat6A, fibre backbone and certified testing keep Brisbane door readers online.

When comparing single-mode vs multimode fibre, single-mode outperforms in almost every situation that matters: distance, bandwidth headroom, future-proofing. The one place multimode wins is cost, specifically the cost of the active equipment that connects it. We’re a licensed electrical and communications contractor based in Brisbane. We specify and install both fibre types on commercial fit-outs […]

Cat6A compliance is decided before a single cable goes into a wall, not checked off at handover. Get the specification wrong at design stage, and no amount of careful termination fixes it later. We’re a licensed electrical and communications contractor delivering structured cabling on commercial fit-outs across Brisbane and South East Queensland. This is one […]

Fusion splicing joins two optical fibres by melting their ends together with a precision electric arc, creating one continuous strand of glass rather than two ends held in contact. It’s the only splicing method Total Fibre & Data (TFD) uses on commercial installations, and the reason comes down to loss, reflection, and long-term reliability, not […]

Fluke is the tester we use to certify TFD’s commercial cabling. Other testers exist, but Fluke is the gold standard, one instrument, run with different modules depending on what’s being tested. On fibre, that means two distinct fibre testing methods: light/loss and OTDR. They’re often confused for each other, but only one of them is […]

Learn how fibre optic network installation works in Brisbane and how Total Fibre & Data delivers reliable fibre systems for commercial projects.

Common data cabling mistakes can impact network performance. Learn what to avoid and how Total Fibre & Data delivers structured cabling solutions in Brisbane.