Skip to main content

Fibre Cable Repair & Fault Finding in Brisbane

Total Fibre & Data (TFD) provides fibre cable repair and fault finding for commercial and industrial sites across Brisbane and South East Queensland. Our ACMA-registered technicians use calibrated OTDR fault-finding and fusion splicing to locate, fix and re-certify damaged fibre optic cabling.
GET A FREE QUOTE
Call 1300 111 020

Our Fibre Cable Repair Services

A damaged or faulted fibre run doesn’t always fail outright. Instead, it’s often intermittent signal loss or a link that’s degraded rather than dead, which makes it hard to diagnose without the right equipment.

That’s why every fibre cable repair we carry out starts with proper fault-finding. We locate, repair and verify damaged fibre optic cabling on commercial and industrial sites. This includes:

TFD technician carrying out a fibre cable repair at Minnippi Golf & Range, Brisbane

OTDR Fault-Finding to Locate the Break or Damage

Fusion Splicing of Damaged Sections, Not Mechanical Splicing

Cable Replacement Where Splicing Isn’t Viable

OLTS Re-Testing to Confirm the Fibre Repair Meets Standard

Repair Report and Documentation

Every repair leaves you with a verified, documented fix — not just a reconnected link.

For new joins, extensions and upgrades, see our fibre splicing services in Brisbane.

See In Detail

Why Choose TFD for Fibre Repair

ACMA-Registered Technicians

We carry out fault-finding and repair under the ACMA cabling provider rules, the regulatory standard commercial and industrial sites require.

Calibrated OTDR and OLTS Equipment

We locate every fault and verify every repair on properly maintained, calibrated gear.

Fusion Splicing, Done Properly

We repair fibre using fusion splicing rather than mechanical splicing, for a lower-loss, more reliable join.

30+ Years of Industry Experience

Three decades locating and repairing fibre faults across the region.

We hold QLD Electrical Contractor License No. 91409, covering both electrical and communications work — but our business is fibre and structured cabling.

Call 1300 111 020

Signs You Need Fibre Cable Repair

Intermittent signal loss or a link that drops out under load
A fibre run that’s gone down entirely
Visible physical damage — from construction work, rodents, or weather
A link that’s failing a compliance re-check it previously passed

If any of this sounds familiar, the fault is usually locatable and repairable rather than something that needs a full re-cable.

How Our Fibre Cable Repair Works

1. Diagnose

OTDR fault-finding to locate exactly where the break or damage is.

2. Repair

Fusion splicing on-site, or cable replacement where splicing isn’t viable.

3. Verify

OLTS re-testing to confirm the repair meets the required light/loss standard.

4. Report

Documentation handover to confirm the fix.

GET IN TOUCH

Who Our Fibre Repair Service Is For

Commercial and industrial sites and contractors with a damaged or faulted fibre link — offices, hospitals, aged care facilities and universities through to meat works, factories and processing plants — covering new fit-outs, existing networks, and jobs where we’re repairing work behind another contractor. This service is for commercial, industrial and contractor fibre links; however, for residential NBN fault-finding, contact your NBN provider directly. For a new fibre or data cabling install rather than a repair, see our Commercial Data Cabling page. For full network testing and certification beyond a single repair, see our OTDR Fibre Testing & Certification page.

Fibre Cable Repair FAQs

What causes fibre cable damage?

Most damage comes from construction work, rodents, weather, or accidental cuts during other site work. That’s why we locate and repair fibre damage from any of these causes.

Can a damaged fibre cable always be repaired, or does it need replacing?

Most damage is repairable by fusion splicing the affected section. We only recommend replacement where damage runs over a long section of cable, or the sheath itself has failed. We assess this on-site and quote for the right fix, not the most expensive one.

How is a fibre fault located before repair?

We use OTDR fault-finding to pinpoint exactly where along the run the break or damage sits, rather than guessing or re-running the whole cable. Ask us about combining fault-finding with full OTDR testing and certification.

How quickly can a repair be done?

In most cases, we complete a single-fault fibre cable repair in one site visit. We confirm a clear timeframe as part of your quote.

Speak to a Fibre Repair Specialist

Contact us to discuss your project.

Call 1300 111 020

Get in Touch

Ready to upgrade your connectivity or security?

Get in touch with the experts at Total Fibre & Data— we're here to deliver smart, reliable solutions for your next project.